Builders / Wyoming
Barndominium builders in Wyoming
Planning a build? Read our guide to building a barndominium in Wyoming.
Builders tracked
Barndominium-specific, deduplicated
Turnkey
Per sqft, directory estimate
Shell only
Per sqft, directory estimate
Permits and codes in Wyoming
Wyoming has no statewide building code and no statewide general contractor license. Code adoption is local: Cheyenne, Casper, Gillette, Laramie, Sheridan and Teton County run real building departments, while much of the unincorporated county land requires no building permit at all. The one statewide trade is electrical, licensed and inspected by the Wyoming Department of Fire Prevention and Electrical Safety, which has authority in all 23 counties. Where cities license contractors you verify locally, not through a state board. Engineering drivers are serious: 100 mph plus wind zones, heavy mountain snow loads and 3 to 4 foot frost depth, so get stamped drawings even where nobody requires them. Septic permits go through a county or city program in most of the state; Wyoming DEQ issues them directly only in Carbon, Niobrara, Platte and Weston counties.
Financing a barndominium in Wyoming
Farm Credit Services of America lends across Wyoming from its Casper office through its Rural 1st program, and Western AgCredit also lends in the state. Local banks like First Interstate and community banks in ag towns also close construction loans. Comps are the problem: distances between sales are huge and appraisers discount unique builds. Expect 20 percent down and a rate premium on remote parcels.
The list (4)
Sorted by review count. Featured listings are labeled.




Ad space available
Your barndo business can be here
Builders, lenders, kit makers and suppliers: put your company in front of people planning a barndominium in Wyoming.
Get the deck and pricingBuilding a barndominium in Wyoming
A finished barndominium in Wyoming runs about $150 to $225 per square foot turnkey, or $45 to $80 per square foot for a shell, by our directory estimates. That puts a 2,400 square foot home at roughly $360,000 to $540,000 before land and site work, slightly above the national medians in our data. We list 4 Wyoming builders.
Wyoming is the most locally run state in this region. There is no statewide residential building code, and we found no state general contractor license, so a county with no building department may never review your plans. The state steps in at four points instead: the electrical wiring permit, the septic permit, the well permit and, if you add solar, an electrical plan review. Everything else depends on the county and on loads that range from plains wind to Teton County's 175 psf snow.
Land, zoning and deed restrictions
Start at the county planning office. Ask whether the parcel is zoned, whether a home with an attached shop is a permitted use in that district, and whether the county issues residential building permits at all. Teton County runs a full code program; other counties do much less, so get the answer in writing. Our barndominium zoning guide lists the questions.
If the parcel is in a platted subdivision, recorded covenants may limit exterior materials, roof colors and outbuildings. Get the recorded documents from the title company and read them yourself before you sign, and look for words like "metal," "exterior materials" and "accessory building."
Codes, engineering and climate
The International Code Council says Wyoming does not have a single, statewide building code; cities and counties adopt and enforce codes locally. Where a local program exists, it can be demanding. Teton County's 2024 building code resolution adopts the 2024 IRC and sets these loads:
| Teton County requirement | Value |
|---|---|
| Ground snow load | 120 psf or 175 psf, by county GIS zone |
| Minimum footing depth for frost | 34 inches |
Those snow numbers are several times what a plains kit is designed for. For a post-frame or steel barndo, that means much heavier trusses or rafters, closer purlins and bigger posts, and the cost shows up in the shell price. Outside a code county, nobody hands you the number, so have the engineer pull site-specific snow, wind and seismic values from the ASCE hazard tool and write them on the drawings. Western Wyoming also sits in the seismic belt the USGS describes as running through western Montana, southeastern Idaho and western Wyoming. Our pole barn house guide explains how loads change a post-frame design.
The state electrical program reaches every parcel. The Department of Fire Prevention and Electrical Safety requires a wiring permit before any new construction or remodel that needs a utility connection, unless the work is exempt under W.S. 35-9-123; a standard permit costs $50, and permits are issued through its online portal. The same page lists alternative energy installations, including solar, residential wind and generators, among the projects that require state plan review. If your barndo plan includes solar panels, budget time for that review.
What a barndominium costs in Wyoming
These figures come from our state table. They are Barndo Finder directory estimates, not transaction data, and exclude land, well, septic, site work and the driveway.
| Size | Shell ($45 to $80/sqft) | Turnkey ($150 to $225/sqft) |
|---|---|---|
| 1,500 sq ft | $67,500 to $120,000 | $225,000 to $337,500 |
| 2,400 sq ft | $108,000 to $192,000 | $360,000 to $540,000 |
| 3,000 sq ft | $135,000 to $240,000 | $450,000 to $675,000 |
Wyoming's shell low matches the national median in our data, and the rest of both ranges sits $5 to $10 per square foot above it (national: shell $45 to $75, turnkey $145 to $215). We would expect a Teton County build with 120 to 175 psf snow framing to land well above the top of the turnkey range, and a plains build near Cheyenne or Casper toward the middle. Compare states on our cost page and see national context in the 2026 cost report.
Financing and insurance in Wyoming
Two Farm Credit associations are listed for Wyoming. Farm Credit Services of America, which serves Iowa, Nebraska, South Dakota and Wyoming, says its Rural 1st construction loans finance barndominium builds, close once, allow up to a year to finish and count land equity toward the down payment. Western AgCredit, which lends in Utah and parts of Wyoming, offers Country Home Loans through a partnership with AgWest Farm Credit. Local banks round out the market. Our construction loan guide and financing page explain draws and appraisals.
Because licensing happens at the city level, if at all, the lender's builder review does work the state does not. Some cities fill the gap: Cheyenne's Contractor Licensing Board sets qualification and examination standards for building contractors under authority Wyoming law gives cities. In the county, ask for proof of liability insurance, references and addresses of finished homes. For insurance, give the agent the stamped drawings with the design snow and wind loads; our insurance guide covers how carriers rate steel and post-frame homes.
Utilities, well and septic
Water comes first. The State Engineer's Office requires a U.W. 5 application and an approved permit before you drill a domestic or stock well, or develop a spring flowing 25 gallons per minute or less. The filing fee for a domestic well is $50, the well must be drilled by a Wyoming licensed water well contractor, and a statement of completion (U.W. 6) is due within 30 days after the well is finished.
Septic systems fall under DEQ's Chapter 25 rules for small wastewater systems. DEQ issues the permit itself only in Carbon, Niobrara, Platte and Weston counties, plus commercial systems in Campbell County; everywhere else, a delegated county or city program is the permitting authority and may use its own forms. Budget with published ranges of $3,500 to $8,500 and up for septic and $10,000 to $30,000 for a drilled well from our build process guide, and expect long power line extensions on remote ranch parcels.
A realistic timeline in Wyoming
Plan on 12 to 18 months from design to move-in, the range in our build timeline guide.
- Before you buy: confirm the well can be permitted, the septic authority for the county, and the site's snow load.
- Pre-construction: 3 to 6 months. Engineering, the well permit, septic permit, wiring permit, loan approval and a county permit where one exists.
- Construction: 6 to 12 months. In the mountains, plan to pour and close in the shell between late spring and early fall; on the plains, crews can work longer, though high-wind days slow steel and truss erection.
Builders we list in Wyoming
We list 4 barndominium builders in Wyoming. Here are all of them, with what our data shows. Ratings are public Google reviews at the time we indexed them.
| Region | Builder | City | Build type | Rating |
|---|---|---|---|---|
| Southeast | CM Construction LLC | Cheyenne | Shell and turnkey | 4.5 (33 reviews) |
| Southeast | Western Building Supply LLC | Wheatland | Shell | 4.9 (23 reviews) |
| Central | Fuller Enterprises Construction, Inc. | Casper | Turnkey | 5.0 (6 reviews) |
| North | A & B Buildings & Supplies | Sheridan | Turnkey | 4.5 (11 reviews) |
Photo: Western Building Supply LLC
Our data shows 34 years in business for A & B Buildings & Supplies. None of these four is in the western mountains, so Jackson and Star Valley buyers should also check our Idaho and Montana pages, and eastern buyers our South Dakota and Colorado pages. Ask any builder for the snow and wind loads on their last three stamped drawings. If you plan to finish the inside yourself, see our shell vs turnkey guide.
When you are ready, request quotes from Wyoming builders who serve your county, and check each one against our cost table.
Updated October 2026 · Barndo Finder research
Building in Wyoming: common questions
Does Wyoming have a statewide building code for homes?
No. The International Code Council notes that Wyoming has no single statewide building code; cities and counties adopt and enforce codes locally. What reaches every county is the state electrical program: a wiring permit from the Department of Fire Prevention and Electrical Safety is required for new construction the utility will connect, unless the work falls under a statutory exemption.
How much does a barndominium cost in Wyoming?
Our directory estimate for Wyoming is $150 to $225 per square foot turnkey and $45 to $80 per square foot for a shell, slightly above the national medians in our data. A 2,400 square foot turnkey home works out to about $360,000 to $540,000 before land, well, septic and site work. These are estimates, not quotes.
Do you need a permit to drill a well in Wyoming?
Yes. The State Engineer's Office says you must file a U.W. 5 application and receive an approved permit before drilling a domestic or stock well. The filing fee for a domestic well is $50, the well must be drilled by a Wyoming licensed water well contractor, and a statement of completion is due within 30 days of finishing.
What snow load does a barndominium need in Jackson Hole?
Teton County's 2024 building code resolution sets ground snow loads by a county GIS map: 120 psf in one zone and 175 psf in the other. It also requires footings at least 34 inches deep. That is many times a typical plains design load, so a kit priced for Cheyenne will need heavy re-engineering for Teton County.
Can you get a loan for a barndominium in Wyoming?
Yes. Farm Credit Services of America serves Wyoming and says its Rural 1st construction loans finance barndominium builds with a one-time close. Western AgCredit, which lends in parts of Wyoming, offers Country Home Loans through a partnership with AgWest Farm Credit. Local banks also make construction loans.